Forum Celovških dvorov Seznam forumov
$1.75 US
$1.95 CAN
Forum Celovških dvorov
Kraj za virtualno zbiranje in klepetanje prebivalcev Celovških dvorov
 
  Pogosta vprašanja     Išči     Seznam članov     Skupine uporabnikov     Registriraj se  
  Tvoj profil     Zasebna sporočila     Prijava  




Technical guide for installation of wood - plastic flooring

 
Objavi novo temo   Odgovori na to temo    Forum Celovških dvorov Seznam forumov -> CELOVŠKI DVORI
Poglej prejšnjo temo :: Poglej naslednjo temo  
Avtor Sporočilo
zhangxiaosan
Legenda soseske


Pridružen/-a: 27.09. 2016, 06:54
Prispevkov: 1069

PrispevekObjavljeno: 04 Feb 2017 02:22    Naslov sporočila: Technical guide for installation of wood - plastic flooring Odgovori s citatom

<p>Wood-plastic flooring installation technology Installation method:
1, because of stainless steel self-tapping screws durable, is the preferred installation of wood molding profiles.
2, when the climate is cold or the use of threaded nails, must be pre-drilling. Pre-drill diameter should be smaller than the diameter of the screw 1/4.
3, compared with the installation of ordinary wood, plastic nails on the nail in the need for more direct force. The best practice is to gently push the straight nail into the 1.5 cm or more, and then use the full or with a nail to break into it.
4, when the profile width is greater than 8cm, each end should be fixed with two screws.
5, when using screws, will drill the wood chips. A simple treatment is to use a hammer to beat, so as to cover the screw; or pre-drilling, reducing wood chips.
</p>
<p>Precautions:
The clearance between edges and edges, head and head must be kept in place (usually between 6mm and 8mm) in consideration of the drainage, cleaning and slight thermal expansion and cold shrinkage of the outdoor environment.
The profile is mounted directly on the joist (or in the stall). Do not mount the profile directly on any solid surface such as concrete, roof or roof.
The spacing of the joist (or stagger) is at least 40-60 cm when the profile is installed and at least 3 joists are used.
When the profile is installed at an angle of 45 degrees with the joist, reduce the joist spacing by at least 10 cm. In special conditions of use or unusual loading conditions, such as hot baths, shorter distances may be required. In these circumstances, it is best to do before installation, please do engineering analysis. </p>
<p>Wood-plastic floor installation, wood-plastic outdoor decoration, WPC wood-plastic railings, handrails, railings and other installations can be applied to this method.</p>
<p>acrylic closeout fence panels<br />
cheap wall thermoplastic panel decorative from china<br />
new composite flooring materials</p>
Nazaj na vrh
Poglej uporabnikov profil Pošlji zasebno sporočilo AIM - AOL Instant - naslov
Pokaži sporočila:   
Časovni pas GMT + 1 ura, srednjeevropski - zimski čas
Objavi novo temo   Odgovori na to temo    Forum Celovških dvorov Seznam forumov -> CELOVŠKI DVORI
 
Stran 1 od 1

 
Pojdi na:  
Ne, ne moreš dodajati novih tem v tem forumu
Ne, ne moreš odgovarjati na teme v tem forumu
Ne, ne moreš urejati svojih prispevkov v tem forumu
Ne, ne moreš brisati svojih prispevkov v tem forumu
Ne ne moreš glasovati v anketi v tem forumu


Powered by phpBB © 2001, 2002 phpBB Group