zhangxiaosan
Legenda soseske
Pridružen/-a: 27.09. 2016, 06:54
Prispevkov: 1069
|
 Objavljeno: 11 Maj 2017 11:41 Naslov sporočila: Long-term storage of construction machinery and post-mainten |
 |
|
<P>DCM, which specialises in soil stabilisation and road recycling, is working on a solar project in the Forest of Dean area of Gloucestershire county, just across the border in England. The job is for the construction of around 1.2km of stabilised highway access roads.Specification for this project requires a 300mm base mix,highway wave graphic an 8% cem1 binder and a top capping consisting of 100mm of type one aggregate with 10% cem1 binder.</P>
<P>The material on site is a mixture of subsoil, limestone and fill, including large deposits of concrete and brick. To tackle this without their standard generic stabilising drum would have been impossible for a number of reasons, not least any likely damage to the drum unit.Such soil mixtures make damaging the tips extremely likely. Indeed, the material would probably need to be excavated and screened at extensive cost both financially and in time.To overcome these problems the company enlisted the FAE MTM with FAE G3-type fixed teeth. With its crushing abilities,ride-on equipments to thermoplastic spraying road marking price not only does it takes the lime stone and concrete in its stride but it also produces a mix consistency second to none, according to DCM.</P>
<P>Another advantage of FAE MTM is the ability to independently adjust the working depth of the drum to the main housing of the unit.The MTM asphalt grinder and soil stabiliser for tractors from 240 to 360 HP can recycle and pulverise to a maximum depth of 40cm and plays a key role for road restoration. For the gravel roads stabilization, the rotor can be equipped with fix hammers with carbide. When recycling or pulverising asphalt roads,pavement alligator cracks on side the hammers can be swapped for round bites. The MTM can also be equipped with a water-spray system that controls dust during dry conditions and cools down the bits during the milling process.The top-of-the-range model is the MTH, which is designed for use with tractors with power ratings of up to 300kW. The unit can be used to grind layers of rock, crush stones, grind asphalt, and stabilise soil, up to maximum working depth of 500mm.</P> |
|
